I notice that it accumulates at the base of the handle just before the bowl of the spoon. I tried scrubbing it off with a scrubby pad with no success.How do I remove the lip gloss accumulation from forks and spoons?
soak in Dawn dish washing liquid or Cascade and boiled hot water until the water is cool enough to handle and use a wash cloth to clean.How do I remove the lip gloss accumulation from forks and spoons?
Billions wiped off the stock markets. Environmental catastrophe. And the biggest problem you have is lip gloss on cutlery! I love it! But seriously, just keep scrubbing, and wear less lip gloss.
ummm dip it in oil then clean it off
that works when there is gum in my hair when im sleeping!
http://img.gamespot.com/gamespot/images/鈥?/a>
oooooo use Mr Clean!!!!!
Wash them
wash it?
Saturday, November 28, 2009
What is the best color lip gloss for someone with light skin and freckles?
I need a really cute, girly color for somone with somewhat pale skin and lots of freckles. If anyone has suggestions or links to good makeup websites I would really appreciate it!What is the best color lip gloss for someone with light skin and freckles?
for light skin and freckles you want to use pastely colors depending on her (or his you never know) hair color. red heads use peachy colors blondes use pale pinks black or brown clear with tined lip balm underneath because you dont want to over power her/him. if your friend is dark headed and a littel bold you might want to try a berry lipstick or gloss it will really show off the fair skinWhat is the best color lip gloss for someone with light skin and freckles?
try something alittle bit dark like a pink to bring out your face.
PINK will look the best on you
a sheer pink and i would go to like clairs.com or limitedtoo.com because all of their colors are really girly.
poop brown
ANY LIGHT COLOR BECAUSE THEN THEY WON'T EVEN NOTICE THE FREKLES AND LIGHT SKIN. THEY WILL FOCUS WHAT BEUTIFUL LIP GLOSS YOU WILL HAVE ON.
light pink would look nice.
I'd say either a nude shade or an extremely light pink shade. I have the same problem and I can't go near anything remotely dark!
Hope it helps!
try nude (very very light pink)
Very pale skin hard..., try pink or shimmer
Hope this helps!
XOXO
a light colored coral thats almost sheer with some sparkle. i have a light skinned friend who has loads of freckles and this lipgloss looks fantastic on her!
http://www.sephora.com/browse/product.jh鈥?/a>
the first choice, allure would look very pretty!
loreal sophoria pink
I would think anything that was a light colored pink that's reallt sparkley would look nice.
red or pink
or with sparkles
ya i know how you feel you never know what good colors are i have blonde hair freckles and pale skin so it is hard to find stuff go for likr pinks and lighter browns. they work really nicely.
If you鈥檙e fair-skinned, sheer colors look best on you.
Various shades of pink will look good on your lips. Peach is always a good choice for fair-skinned. It looks natural and compliments your skin color.
I am the same way, the lip gloss i use is Clinique, estee lauder, and maybelenne(hmm did i spell thta right?). For fair skin, get a suttle color, not a dark color and not too bright. One with sparkles is also cute too! 鈾?For more tips, go to a local cosmetics storer and ask a professional for tips.
for light skin and freckles you want to use pastely colors depending on her (or his you never know) hair color. red heads use peachy colors blondes use pale pinks black or brown clear with tined lip balm underneath because you dont want to over power her/him. if your friend is dark headed and a littel bold you might want to try a berry lipstick or gloss it will really show off the fair skinWhat is the best color lip gloss for someone with light skin and freckles?
try something alittle bit dark like a pink to bring out your face.
PINK will look the best on you
a sheer pink and i would go to like clairs.com or limitedtoo.com because all of their colors are really girly.
poop brown
ANY LIGHT COLOR BECAUSE THEN THEY WON'T EVEN NOTICE THE FREKLES AND LIGHT SKIN. THEY WILL FOCUS WHAT BEUTIFUL LIP GLOSS YOU WILL HAVE ON.
light pink would look nice.
I'd say either a nude shade or an extremely light pink shade. I have the same problem and I can't go near anything remotely dark!
Hope it helps!
try nude (very very light pink)
Very pale skin hard..., try pink or shimmer
Hope this helps!
XOXO
a light colored coral thats almost sheer with some sparkle. i have a light skinned friend who has loads of freckles and this lipgloss looks fantastic on her!
http://www.sephora.com/browse/product.jh鈥?/a>
the first choice, allure would look very pretty!
loreal sophoria pink
I would think anything that was a light colored pink that's reallt sparkley would look nice.
red or pink
or with sparkles
ya i know how you feel you never know what good colors are i have blonde hair freckles and pale skin so it is hard to find stuff go for likr pinks and lighter browns. they work really nicely.
If you鈥檙e fair-skinned, sheer colors look best on you.
Various shades of pink will look good on your lips. Peach is always a good choice for fair-skinned. It looks natural and compliments your skin color.
I am the same way, the lip gloss i use is Clinique, estee lauder, and maybelenne(hmm did i spell thta right?). For fair skin, get a suttle color, not a dark color and not too bright. One with sparkles is also cute too! 鈾?For more tips, go to a local cosmetics storer and ask a professional for tips.
Can you apply a coat of gloss paint directly onto a varnish surface?
I would like to paint directly onto the varnish pine stair case.Can you apply a coat of gloss paint directly onto a varnish surface?
No, at the very least undercoat first.
It is poor paint practise to paint over varnish. The varnish is so hard that paint has a tendency to chip off when it is banged. When varnish has been applied properly it will have soaked deep into the wood so even when you strip it the surface is usually still sealed and a wood primer cannot soak in. Hence it is poor painting practice. (Ever seen an old white painted staircases with brown chips where the gloss has knocked off)
People do it. (though I never have) Ideally you take all or as much as the varnish off as possible, but that is hard work. But at least make sure you have rubbed them down enough to have keyed/scuffed the entire surface. This is important as your paint is not going to properly adhere to varnish and needs those scratches to get some kind of grip.
You could try a specialist primer first like prime-it -plus or Bullseye 123. These primers try to glue themselves to the non-absorbant surface rather than relying on soaking into it as traditional primers do.Can you apply a coat of gloss paint directly onto a varnish surface?
You can yet it won't hold up very well.
Best thing to do is wash the surfaces down with ammonia (I use the instructions for floor wax removal, since some polish residue may be present) I use nylon pads for wood refinishing to scrub the surfaces with, wipe off the residue then rinse well. This method combines cleaning %26amp; sanding in one step.
Once dry use an universal acylic primer/sealer/bond coat that doesn't require prior sanding (becuase these will stick to glossy surfaces). The best I've used are BIN's Bullseye water-base and Benjamin Moore's Freshstart. Both are low oder, cover great (get these tinted to the finish coat)and are easily brushed out. I alway apply two coats and let dry overnite before caulking any cracks and gaps.
AS for the finish paint use a quality acrylic enamel, since these dry faster and smell better, plus are easier to touch-up later on since acrylics don't ';yellow '; with age like alkyds.
If you paint the treads %26amp; risers then give those 2 coats of a clear acrylic-urathane after 3 days. Kelly-Moore %26amp; others have this for gym floors, cabinets, fauxed surfaces, etc. This will protect the paint from scuffs and stronger cleaners.
probably but it depends on the varnish type and the gloss type. Sand down the varnish lightly to give a ';key'; then you can paint a small area to test.
Gloss paint is not very opaque so I would put a coat of undercoat on 1st to cover the wood colour, then you can apply the gloss.
If the gloss is strong colour you may get away with 2 coats of it, but 1 will definately not cover.
Since all the above answers are a step in the right direction, I would only add your finish coat will actually survive foot traffic if the primer coat is ';thinned'; enough to actually soak into the wood surface.... It will stick well if the varnish is etched either chemically or mechanically. The primer should be oil based (mineral spirits) or pigmented shellac (denatured alcohol) Then follow up with your gloss coat(s)!
yea you can after you rough it up a little.
Heres the easy way. Buy a can of LIQUID SANDPAPER at the paint store. You rub this over the varnish. Then paint over it. You are done.
i guess it depends on the varish oil based would not work well. but any other would be fine, you might want to prime it anyways, so that the color turns out the same as you expect it.
I wouldn't apply gloss paint to any surface that I hadn't first sanded down and undercoated.
It might sound like a lot of hard work but you will get a much better finish and the paint won't flake or line.
Yes. You CAN APPLY PAINT TO ANYTHING YOU WANT.
No, at the very least undercoat first.
It is poor paint practise to paint over varnish. The varnish is so hard that paint has a tendency to chip off when it is banged. When varnish has been applied properly it will have soaked deep into the wood so even when you strip it the surface is usually still sealed and a wood primer cannot soak in. Hence it is poor painting practice. (Ever seen an old white painted staircases with brown chips where the gloss has knocked off)
People do it. (though I never have) Ideally you take all or as much as the varnish off as possible, but that is hard work. But at least make sure you have rubbed them down enough to have keyed/scuffed the entire surface. This is important as your paint is not going to properly adhere to varnish and needs those scratches to get some kind of grip.
You could try a specialist primer first like prime-it -plus or Bullseye 123. These primers try to glue themselves to the non-absorbant surface rather than relying on soaking into it as traditional primers do.Can you apply a coat of gloss paint directly onto a varnish surface?
You can yet it won't hold up very well.
Best thing to do is wash the surfaces down with ammonia (I use the instructions for floor wax removal, since some polish residue may be present) I use nylon pads for wood refinishing to scrub the surfaces with, wipe off the residue then rinse well. This method combines cleaning %26amp; sanding in one step.
Once dry use an universal acylic primer/sealer/bond coat that doesn't require prior sanding (becuase these will stick to glossy surfaces). The best I've used are BIN's Bullseye water-base and Benjamin Moore's Freshstart. Both are low oder, cover great (get these tinted to the finish coat)and are easily brushed out. I alway apply two coats and let dry overnite before caulking any cracks and gaps.
AS for the finish paint use a quality acrylic enamel, since these dry faster and smell better, plus are easier to touch-up later on since acrylics don't ';yellow '; with age like alkyds.
If you paint the treads %26amp; risers then give those 2 coats of a clear acrylic-urathane after 3 days. Kelly-Moore %26amp; others have this for gym floors, cabinets, fauxed surfaces, etc. This will protect the paint from scuffs and stronger cleaners.
probably but it depends on the varnish type and the gloss type. Sand down the varnish lightly to give a ';key'; then you can paint a small area to test.
Gloss paint is not very opaque so I would put a coat of undercoat on 1st to cover the wood colour, then you can apply the gloss.
If the gloss is strong colour you may get away with 2 coats of it, but 1 will definately not cover.
Since all the above answers are a step in the right direction, I would only add your finish coat will actually survive foot traffic if the primer coat is ';thinned'; enough to actually soak into the wood surface.... It will stick well if the varnish is etched either chemically or mechanically. The primer should be oil based (mineral spirits) or pigmented shellac (denatured alcohol) Then follow up with your gloss coat(s)!
yea you can after you rough it up a little.
Heres the easy way. Buy a can of LIQUID SANDPAPER at the paint store. You rub this over the varnish. Then paint over it. You are done.
i guess it depends on the varish oil based would not work well. but any other would be fine, you might want to prime it anyways, so that the color turns out the same as you expect it.
I wouldn't apply gloss paint to any surface that I hadn't first sanded down and undercoated.
It might sound like a lot of hard work but you will get a much better finish and the paint won't flake or line.
Yes. You CAN APPLY PAINT TO ANYTHING YOU WANT.
How do you clean that hi-gloss work-top?
I have just had a new kitchen fitted with hi-gloss worktop and though it looks lovely it is a pain to clean. I can never seem to get rid of the water marks... help!!!How do you clean that hi-gloss work-top?
I have high gloss worktops - they look gorgeous when just cleaned but really are a pain in the butt. I use glass cleaner with either a microfibre cloth or kitchen towel.How do you clean that hi-gloss work-top?
Glass-cleaner or white vinegar and a clean tea-towel. It was on how clean is your house last week I tried it and it works.
Make sure that after you have cleaned it you dry and buff it thoroughly. You could even use polish if you are not going to prepare food directly on it.
A good cleaner for high-gloss finishes is an Anti-bacterial spray ~ don't use any harsh or abrasive cleaners.
Get a micro-fibre cloth. After cleaning the surface with whichever cleaner you like, rub it over with a dry cloth, then polish it with the micro-fibre one. It's a pain, but it's the only way you get all the streaks off.
use a clean damp cloth and wipe with gentle hand
never use abrasive cleaners / detergent / bleach for cleaning worktops
always use a damp cloth - add a bit of fairy liquid if you like but nothing else - you know those yellow ones - you get 3 or 4 for a pound in pound shop
tescos do j-cloths - 10 for about 37 p - they work good too but not as good as the yellow cloths
just use normal surface cleaners and a soft cloth..dont use abrasive cleaners that could scratch.
I have high gloss worktops - they look gorgeous when just cleaned but really are a pain in the butt. I use glass cleaner with either a microfibre cloth or kitchen towel.How do you clean that hi-gloss work-top?
Glass-cleaner or white vinegar and a clean tea-towel. It was on how clean is your house last week I tried it and it works.
Make sure that after you have cleaned it you dry and buff it thoroughly. You could even use polish if you are not going to prepare food directly on it.
A good cleaner for high-gloss finishes is an Anti-bacterial spray ~ don't use any harsh or abrasive cleaners.
Get a micro-fibre cloth. After cleaning the surface with whichever cleaner you like, rub it over with a dry cloth, then polish it with the micro-fibre one. It's a pain, but it's the only way you get all the streaks off.
use a clean damp cloth and wipe with gentle hand
never use abrasive cleaners / detergent / bleach for cleaning worktops
always use a damp cloth - add a bit of fairy liquid if you like but nothing else - you know those yellow ones - you get 3 or 4 for a pound in pound shop
tescos do j-cloths - 10 for about 37 p - they work good too but not as good as the yellow cloths
just use normal surface cleaners and a soft cloth..dont use abrasive cleaners that could scratch.
How can i get a high gloss metallic chrome finish on my arts project?
I need to add a protective sealer, but so far everything I've used dulls metallic finishes. Is there a way around this?How can i get a high gloss metallic chrome finish on my arts project?
Anything you spray on it will dull. I'd suggest treating it like silver and use a tarnish preventative buffing cloth.How can i get a high gloss metallic chrome finish on my arts project?
You make metals shine by polishing. There are coatings that will help preserve a shine some, but it must already be polished to a shine to start with.new hair styles
Anything you spray on it will dull. I'd suggest treating it like silver and use a tarnish preventative buffing cloth.How can i get a high gloss metallic chrome finish on my arts project?
You make metals shine by polishing. There are coatings that will help preserve a shine some, but it must already be polished to a shine to start with.
What happens to all the lip gloss / lipstick on your lips during the day?
Even if you manage not to lick your lips or touch them to anything during the day, by the end of the day or even before that the lip gloss / lipstick is gone. What happens to all the lip gloss / lipstick on your lips during the day?
it wears off due to sun, saliva, kisssing, eating etc. every day activits
What happens to all the lip gloss / lipstick on your lips during the day?
It just wears off when you do everything eating and everything that the person put before me.
it evaporates off your lip
It doesn't evaporate, your lips absorb it.
it wears off due to sun, saliva, kisssing, eating etc. every day activits
What happens to all the lip gloss / lipstick on your lips during the day?
It just wears off when you do everything eating and everything that the person put before me.
it evaporates off your lip
It doesn't evaporate, your lips absorb it.
What's the best way to de-gloss walls that were painted with semi-gloss or gloss paint?
to prepare them for re-painting?What's the best way to de-gloss walls that were painted with semi-gloss or gloss paint?
You can use a deglosser or use a primer by zinsser called 123 it made to stick to glossy surfaces without sanding.Just apply a coat of primer and top coat with any paint.Usually with semi gloss you dont need to but gloss would be a good idea so it adheres.What's the best way to de-gloss walls that were painted with semi-gloss or gloss paint?
you need to repaint your walls Just paint over them would be fine
use the lowest grade sand paper there is wet it down. give the walls a quick wet sand. wash and dry.
the paint dept or store will have a product called ';De-glosser';, which is applied and wiped off.
You can use a deglosser or use a primer by zinsser called 123 it made to stick to glossy surfaces without sanding.Just apply a coat of primer and top coat with any paint.Usually with semi gloss you dont need to but gloss would be a good idea so it adheres.What's the best way to de-gloss walls that were painted with semi-gloss or gloss paint?
you need to repaint your walls Just paint over them would be fine
use the lowest grade sand paper there is wet it down. give the walls a quick wet sand. wash and dry.
the paint dept or store will have a product called ';De-glosser';, which is applied and wiped off.
Subscribe to:
Posts (Atom)